Accessories/Parts

---

Our 26” x26” Landing Extension is made of  sturdy wood steps with anti-skid treads, and a black powder coated steel frame. To use, flip the Extension Landing upside down and place it over the steps.  You can also use it as a loading aid to climb onto and off of truck beds.

ATW  (all-terrain wheels ) are 15” x 6” and pneumatic - you roll effortlessly across your client’s expensive sod lawn, gravel, sand and construction sites. No tools are needed. The ATW wheels quickly attach to the back side of the hook bar on the lectrotruck.

The Concave Strap bar is a variation of the standard strap bar; Positions cylindrical loads on the toe plate. 

Sizes available are:
    • 36" dia. Commercial  - Call for pricing in USD  

     • 12"  dia. Single - Call for pricing in USD

     •  2-12" dia. Double - Call for pricing in USD

Great for beginner users and deliveries on tapered, beveled or worn stairs. Also useful for chalking the load during vehicle transportation.

Can be purchased as (1) Wheel Brake

Mounts into the bed of your truck or the floor of your trailer to allow the LECTROTRUCK to be used as a  powered lift gate.

The toe plate adapter offers a  deeper 12" plate to set your load on. Available in   24" & 30" widths including custom sizes.

   • 30"x12" - Call for pricing in USD    

 • 24"x12" Single - Call for pricing in USD

  • Tech Custom Size  - Call for pricing in USDD

Installs under your load with a strap. Stand the load upright and you can maneuver in less room than usual.

The Heavy-Duty Tripod (A) attaches to the LECTROTRUCK and the
Hook Bar (B) to move loads over smooth surfaces. (Steel Models Only.)

The Balance Box Kit makes short, heavy loads taller by shimming it up with the balance box. It really makes the tough loads easy to manipulate.

The 6 amp battery charger simply plugs into the wall and then into your LECTROTRUCK to efficiently

charge overnight.

Complete with new footpads, rivets, rubber strap bar holders, and a
silicone lubricant. 

The battery power converter kit easily adapts the electrical system to any power current system in the world.

ATW  (all-terrain wheel ) 15” x 6” and pneumatic. Attaches to ATW wheel Axle. Two Wheels Shown.

Located inside the battery pack.

Be ready when your making a delivery and the battery fails. Keep a spare battery pack charged and with you, for large jobs.  Do not store battery pack outside. Pop it off the back of the machine and keep in a temperature controlled environment. 

Located on front of Machine. This view is from the top and shows the back side of the flat strap bar.

Located on flat strap bar.

Located on concave and flat strap bar. Not availlable on the LTA4512E.

Located on the bottom of the frame. Shown with Two Foot Pads.

Two located on the top of the extension handle and one located on the hook bar.

Located on the Battery Pack

Located on the Power Wires in the Outer Frame

On Board Charger. Located inside the battery box.

LT12 - All model except for LTA4512E - Call for pricing in USD

LA1812 -LTA4512E & LS2000 Models-- Call for pricing in USD

Do not store battery outside. Keep in a temperature controlled environment.